Our offer is only for you if you are of legal age. Please confirm that you are at least 18 years old to proceed.
How does an electric hookah work?
An electric hookah works on the same basic principle as a classic hookah. The key difference is the heat: instead of glowing hookah charcoal, an electric heating element heats the hookah tobacco in a pod. The electronics control the temperature. When you draw, the smoke travels through the water in the base as usual and then through the hose to you.
In short: electricity replaces the charcoal, the hookah principle stays the same.
- An electric heating element takes over the job of the hookah charcoal.
- A battery or a cable supplies the power.
- The electronics keep the temperature constant throughout the session, and on the XKAH Pro you set it yourself in custom mode, up to 305 °C.
- After around 8 minutes of preheating, an XKAH is ready to smoke, and a session then runs for 50 minutes.
- When you draw, the airflow works just like on a classic hookah.
- E-shishas are something else: they vaporise liquid like an e-cigarette.
Want to understand first what happens when you draw on a regular hookah? We explain it in detail in our guide How Does a Hookah Work?
Classic hookah vs. electric hookah: what changes?
Strictly speaking, not much. On a classic hookah, glowing charcoal creates the heat and an HMD spreads it over the tobacco underneath. On an electric hookah, an electric heating element does this job.
How much work goes into classic heat management is often something you only notice once it's gone. The charcoal has to glow through on all sides, moves from the burner to the charcoal basket and from there into the smokebox. In between, you tap off the ash, set a coal aside when it gets too hot, and play around with coal size and position until the tobacco releases its flavour without burning. On an electric hookah, you set a mode or a temperature, and the device holds it.
| Classic hookah | Electric hookah |
|---|---|
| Natural charcoal creates the heat | Heating element creates the heat |
| Embers as the heat source | Electricity as the power source |
| HMD regulates the heat | Electronics control the temperature |
| Charcoal has to glow through | Heating system preheats for around 8 minutes |
| Heat management by hand | Temperature via mode or degree setting |
| Smoke path through the hookah | Smoke path through the hookah |
So you no longer need charcoal, a charcoal burner or charcoal tongs. Ash and charcoal residue disappear, and so does the typical charcoal smell. Without the charcoal, there's also no combustion, which is where most of the carbon monoxide on a classic hookah comes from.
Important: This doesn't make smoking hookah any healthier. You're still smoking tobacco with nicotine. In studies, nicotine intake stayed the same with charcoal and with electric heating. Irritants like acrolein were even higher with electric devices, and the tobacco smoke puts a strain on your blood vessels with both. In measurements, this strain is less visible with charcoal. That is misleading, though, because the large amount of carbon monoxide briefly widens the blood vessels and so distorts the result. You'll find the full comparison in our article Is an electric hookah better than a regular hookah?
You'll find all systems at a glance in our Electronic Hookah category.
What types of electric hookahs are there?
"Electric hookah" is an umbrella term that covers quite different devices. Roughly speaking, there are three main categories:
- e-HMD: An electric heat management device replaces the charcoal, burner and HMD. You put it on a prepared clay bowl, and the rest of your hookah stays as it is. Many e-HMDs are corded, though, and need a power socket nearby.
- Hybrid system: An electric bowl and an e-HMD in one device. The XKAH Pro and the XKAH Lite belong to this group. You fill the pod with tobacco and put the device on your existing hookah like a normal bowl.
- All-in-one system: The hookah and the heating technology form one device, as with the shii. Some complete systems use the capsule principle with prefilled pods. That's very simple, but it ties you down when it comes to choosing tobacco, and the smoke is often noticeably weaker than on a regular hookah.
How an electric hookah works, step by step
Setup and handling vary a little from device to device. The basic technical principle is similar for all of them, though.
1. Preparation: adding tobacco or inserting a pod
Before the device can heat anything, it needs something to heat. With open systems like the XKAH and shii, you fill your regular hookah tobacco into a metal pod, around 8 to 12 g, loosely and without pressing it down. So you keep smoking your favourite flavours.
With closed systems, you insert a prefilled pod that already contains the tobacco. That gives you two basic approaches:
- Open hookah system: You fill the pod yourself.
- Closed pod system: The contents are already prepared.
2. A battery or cable supplies the power
Now the heating system needs power. Depending on the device, it comes from a built-in battery, a swappable battery, a cable or a combination of battery and mains power. The power supply mainly decides how mobile you are.
The XKAH Pro uses a swappable 13,600 mAh battery, while the XKAH Lite runs on a power cable that attaches magnetically. The shii runs on its battery or directly on the USB-C cable. Technically, all versions do the same job: they supply the heating element with power.
3. The electric heating element creates the heat
Once you switch the device on, the heat-up phase begins. The heating element warms up and passes the heat on to the pod and the tobacco. Depending on the technology, it works with direct contact heat, heated air or a combination of both. The goal is the same for every version: the tobacco should be heated evenly and in a controlled way.
So what's new is mainly how the heat is created and how it's controlled.
4. Why does an electric hookah need to preheat?
The heating element, pod and tobacco first have to reach the right temperature. On the XKAH, this preheat takes around 8 minutes, on the shii 8 to 10 minutes. After that, the smoke builds up fully within the first few minutes of the session.
With a classic hookah, you wait for the natural charcoal to glow through, with an electric one, you wait for the heating system to warm up. Lighting charcoal and preparing embers are no longer part of the routine.
5. Temperature and power: how to control the intensity of your hookah enjoyment
Once the device has heated up, the electronic temperature control takes over. On a classic hookah, you control the heat through the number and position of the coals, but electric works differently. Depending on the device, you can:
- choose a temperature,
- switch between power levels,
- use a preset mode,
- adjust the heat during the session.
On the XKAH Pro, you can set up to 305 °C and sessions of up to 90 minutes in custom mode. The XKAH Lite goes up to 310 °C, and the shii regulates from 265 to 315 °C and also has a hardcore mode for very strong Dark Blends.
The highest setting isn't automatically the best, though. Tobaccos react differently to heat, and with the electronics you hit the right temperature more precisely than with natural charcoal. Our recommendation for the XKAH: start Virginia and blonde tobacco at 260 to 270 °C and Dark Blends at 290 to 305 °C, then adjust to taste after around 10 minutes. You'll find more settings and tips in our XKAH Guide.
How does an e-HMD work?
An e-HMD isn't a complete electric hookah. It only electrifies the top part of your setup. A system like the XKAH replaces several parts there at once:
- hookah bowl
- classic HMD
- charcoal
- charcoal burner
You keep using your base, stem, hose and mouthpiece. So you simply put the electric system on the hookah you already own. The housing stays hand-warm on the outside, so you can touch it during the session. You'll find the right models in our XKAH category.
XKAH XKAH Pro Silver Hookah Smokebox To the product How does an all-in-one system work?
With an all-in-one hookah, the hookah and the electric heating technology already come together. So you don't need a separate hookah. One example is the shii: the heating system, base, hose and mouthpiece are all part of one system. The process is still the same:
- Prepare the pod
- Connect the power supply
- Switch on the device
- Bring the heating system up to temperature
- Heat the tobacco
- Draw through the hose
How the shii is built in detail is covered in our guide Shii electric hookah 2026: everything you need to know.
shii shii electronic Hookah - Black To the product What happens to the tobacco, and what affects the hookah flavour?
Besides the tobacco itself, hookah tobacco contains molasses, a moist mix of humectants and flavourings. When it's heated, this creates the aerosol that you experience as thick smoke during the session.
What matters is the right heat, not the highest. The temperature has to suit the tobacco and the setup. When it does, you get thick clouds and full flavour. If it's too cool, the smoke stays thin, and if it gets too hot, the tobacco quickly tastes harsh.
Since there's no charcoal taste, the tobacco often tastes purer on an electric hookah. Many smokers describe this as different, not automatically better. The flavour is also affected by:
- the amount of tobacco in the pod
- the design of the pod
- airflow
- the moisture of the tobacco
- the length of the session
- your personal smoking habits
Airflow in particular plays a big role. When you draw, air flows through the system and carries the aerosol with it. How open a device draws therefore affects how intensely you experience the smoke and flavour. On the XKAH, the draw stays close to that of a loosely packed traditional bowl.
So the electric technology replaces classic heat management, not all the other factors behind a good session.
What happens when you draw?
From here on, an electric hookah hardly differs from a regular hookah. You draw on the mouthpiece, which creates negative pressure in the closed system, and the aerosol travels through the stem, the downstem and the water in the base into the hose. We linked the guide on how a hookah works above, if you want to follow the exact path.
For the electric hookah, all you need to know is this: the technology changes the heat source and how it's controlled, while the airflow through the hookah stays the same.
What changes in everyday life with an electric hookah?
Now you know the principle. In everyday use, you'll mainly notice the difference in all the things around it that you can leave out.
- Preparation: Charcoal, charcoal burner and charcoal tongs stay in the cupboard. You fill the pod, switch the device on and wait for the preheat.
- Heat management: No tapping off ash, no adding coals, no moving them around. The temperature stays where you set it.
- Cleaning: Ash and charcoal residue are a thing of the past. On the XKAH Pro, the bottom part and the pod can go under water, and you wipe the top part with the electronics dry or with isopropyl alcohol.
- Smell in the room: The typical charcoal smell stays away, and indoors you only smell the tobacco.
- On the go: With a battery-powered device like the XKAH Pro, you need neither embers nor a power socket. What you need to keep in mind when flying is covered in our article Traveling with a Hookah: Bringing Charcoal, Tobacco & Accessories on a Plane.
What an electric hookah costs to buy and over time is worked out for you in How much does an electric hookah cost?
How does an e-shisha work compared to an electric hookah?
The names sound almost the same, but the technology is completely different. An e-shisha is a vape, in other words an e-cigarette. In English, you'll usually hear it called an e-hookah or simply a vape. Technically, it has nothing in common with hookah tobacco or a hookah.
Why are vapes called e-shishas?
Linguistically, "e-shisha" would be an obvious name for an electric hookah. Over the last few years, though, the term has caught on for vapes: disposable e-cigarettes, pod systems with cartridges and even vaporisers that you put on a hookah's bowl adapter to vaporise liquid. That's why, for devices that heat real hookah tobacco, we prefer to say electric hookah.
E-shishas work like an e-cigarette
- Power: A battery supplies power to the atomiser, known as the coil. The electronics keep the output constant so the coil heats evenly.
- Liquid: Instead of tobacco, an e-shisha contains a liquid. It typically consists of propylene glycol, vegetable glycerine, flavourings and optionally nicotine.
- Vaporising: The heating wire in the coil heats the liquid, creating an aerosol that you inhale.
With an e-shisha, how much vapour is produced and how it all tastes depends on the heating system, the liquid and the airflow. The atomiser has the biggest influence. This isn't harmless to your health either: the aerosol can contain harmful substances, and there's still hardly any research on what some vaporised liquid ingredients do to the lungs. Because of the sweet flavours and colourful designs in particular, vapes also appeal to young people. That's why nicotine, in whatever form, is only for people aged 18 and over.
| E-shisha | Electric hookah | |
|---|---|---|
| What gets heated? | Liquid | Hookah tobacco in the pod |
| Heat source | Heating coil | Heating element above the pod |
| Hookah | none | Smoke passes through the water in the base |
| Design | handheld device like an e-cigarette | attachment for your hookah or a complete hookah |
You can read more about the difference in our article What is the difference between an e-hookah and an e-cigarette?
Our verdict: how an electric hookah works
The principle is pretty simple: an electric hookah replaces the hookah charcoal with an electronically controlled heating system. A battery or cable supplies the power, a heating element warms the tobacco in the pod, and the electronics hold the temperature. When you draw, the hookah then works just like a classic one.
The key difference is heat management: instead of natural charcoal, embers and adding coals by hand, the heating element and the electronics do the work.
You'll find all electric hookahs in our shop.
Frequently asked questions about how an electric hookah works
How does an electric hookah work?
An electric heating element heats the hookah tobacco in a pod, a battery or cable supplies the power, and the electronics control the temperature. The smoke then passes through the water and the hose just like on a classic hookah.
What types of electric hookahs are there?
There are three main categories: e-HMDs, which only replace the heat management device, hybrid systems like the XKAH Pro and XKAH Lite, which combine a bowl and an e-HMD in one device, and all-in-one systems like the shii, where the hookah and the heating technology are one device.
How long does an electric hookah need to preheat?
On the XKAH, preheating takes around 8 minutes, on the shii 8 to 10 minutes. After that, the smoke builds up fully within the first few minutes of the session.
How long does a session last?
On the XKAH, a session runs for 50 minutes. If your tobacco still has flavour left after that, skip the preheat and keep smoking. On the XKAH Pro, you can set up to 90 minutes in custom mode.
What temperature can you set on the XKAH Pro?
In custom mode, you choose the temperature on the XKAH Pro yourself, up to a maximum of 305 °C. The XKAH Lite goes up to 310 °C, and the shii regulates from 265 to 315 °C. For Virginia and blonde tobacco, we recommend 260 to 270 °C, for Dark Blends 290 to 305 °C.
What do I no longer need with an electric hookah?
Charcoal, a charcoal burner, charcoal tongs and classic heat management. A traditional hookah needs all of that, while on an electric one the heating element and the electronics do the work. You control the heat with a mode or a temperature setting.
Does an electric hookah smell less in your home?
The charcoal smell disappears because there's no charcoal smoke. So indoors, you only smell the tobacco. You should still air the room, though.
How much tobacco goes into the pod?
Around 8 to 12 g, filled in loosely and not pressed down.
Does an electric hookah produce carbon monoxide?
On a classic hookah, most of the carbon monoxide comes from burning the charcoal, and there's no charcoal on an electric hookah. This doesn't make smoking hookah any healthier, though: nicotine intake stays the same, irritants like acrolein are even higher with electric heating, and the strain the tobacco smoke puts on your blood vessels remains with both.
Is cleaning an electric hookah easier?
Yes, because there's no ash or charcoal residue. On the XKAH Pro, the bottom part and the pod can go under water, and you clean the top part with the electronics dry or with isopropyl alcohol.
What happens if the battery runs out during a session?
Then the heating stops. On devices with a swappable battery like the XKAH Pro, you put in a charged battery. Corded devices like the XKAH Lite keep running as long as they have power.
Do I need to buy a new pod for every new flavour?
Not with open, reusable pods. After cleaning, you simply refill them. With closed pod systems, you use the prefilled pod in the flavour you want.
Can I take an electric hookah apart right after the session?
Wait a few minutes. The heating element, pod and nearby parts are still very hot after the session. Let them cool down before you take them out or clean them, and ideally lift the pod out with the tongs.
Does an e-shisha work the same way as an electric hookah?
No. An e-shisha works like an e-cigarette: a coil vaporises liquid made of propylene glycol, glycerine, flavourings and optionally nicotine. An electric hookah, on the other hand, heats hookah tobacco and still uses the hookah principle. So when you buy, check whether the products are e-shishas, in other words e-cigarettes, or electric hookahs.
What does the vapour production of an e-shisha depend on?
On the heating system, the liquid and the airflow. The atomiser has the biggest influence on the amount of vapour and the flavour. The electronics keep the output constant.
What's in an e-shisha liquid?
Typically propylene glycol, vegetable glycerine, flavourings and, depending on the liquid, nicotine. There's no hookah tobacco in it.
What does hybrid system mean for an electric hookah?
A hybrid system combines an electric hookah bowl and an e-HMD in one device. So the XKAH Pro holds the tobacco and takes care of heat management at the same time. You keep using the hookah you already have.
Knowledge area








